1310nm optical circulator Manufacturers

A superradiance light source (also known as an ASE light source) is a superradiance-based broadband light source (white light source). (It is often mistakenly called a superluminescent light source, which is based on a different phenomenon called superfluorescence.) Generally, a superluminescent light source contains a laser gain medium that is excited to radiate light and then amplified to emit light.

Raman fiber amplifier (RFA) is an important part of dense wavelength division multiplexing (DWDM) communication system. In many nonlinear optical media, the scattering of pump light with a shorter wavelength causes a small part of the incident power to be transferred to another beam whose frequency is shifted down. The amount of frequency shift down is determined by the vibration mode of the medium. This process is called pulling Mann effect. If a weak signal and a strong pump light wave are simultaneously transmitted in the fiber, and the weak signal wavelength is placed within the Raman gain bandwidth of the pump light, the weak signal light can be amplified. This mechanism is based on stimulated Raman scattering The optical amplifier is called RFA.

Thermistors are mainly used for temperature monitoring, overheating protection, etc. It is a temperature-sensitive semiconductor resistor whose resistance changes significantly with changes in temperature. It uses the heat-sensitive effect of semiconductor materials to measure and control temperature, and is widely used in various electronic devices and systems. Thermistors have the advantages of small size, fast response speed, and high measurement accuracy. Therefore, they have been widely used in temperature measurement, temperature control, overcurrent protection and other fields. Text symbols are generally represented by "RT".

Wavelength division multiplexing refers to a technology in which signals of different wavelengths are transmitted together and separated again. At most, it is used in optical fiber communication to transmit data in multiple channels with slightly different wavelengths. Using this method can greatly improve the transmission capacity of the optical fiber link, and the use efficiency can be improved by combining active devices such as optical fiber amplifiers. In addition to applications in telecommunications, wavelength division multiplexing can also be applied to the case where a single fiber controls multiple fiber optic sensors.

Ultrafast laser is a kind of laser based on SESAM, Kerr lens and other mode-locking technology, the pulse width is in the order of ps or even fs.

Randomly distributed feedback fiber laser based on Raman gain, its output spectrum has been confirmed to be wide and stable under different environmental conditions, and the lasing spectrum position and bandwidth of the half-open cavity DFB-RFL is the same as the added point feedback device The spectra are highly correlated. If the spectral characteristics of the point mirror (such as FBG) change with the external environment, the lasing spectrum of the fiber random laser will also change. Based on this principle, fiber random lasers can be used to realize ultra-long-distance point-sensing functions.