980nm pump laser diode Manufacturers

0.3mm Active Area InGaAs photodiodes for near-infrared light detection. Features include high speed, high sensitivity, low noise, and spectral responses ranging from 1100nm to 1650nm Suitable for a wide range of applications including optical communication, analysis, and measurement.

The High Power C-band 10W 40dBm EDFA Fiber Optical Amplifier Module (EYDFA-HP) is based on the double-clad erbium-doped fiber amplifier technology, using a unique optical packaging process, coupled with a reliable high-power laser protection design, to achieve high-power laser output in the 1540~1565nm wavelength range. With high power and low noise, it can be used in fiber optic communication, Lidar, etc.

This Low cost C-band ASE Broadband Light Source has C-band wavelength, with 5~7dB spectral flatness and SM fiber and for fiber sensing applications.

The Erbium Doped Fiber Amplifier EDFA can be used to improve the optical signal power in the range of - 6dbm to + 3dbm, and the saturation power can be up to 26dbm, which can be used after the optical transmitter to improve the transmission power.

Our 1650nm 2mW 4mW DFB Pigtail Laser Diode is generally applied for stabilizing or modulating light source. In addition, the high stability laser source can be used for testing apparatus and OTDR equipment. The laser diode is composed of a CWDM-DFB chip, built-in isolator, built-in monitor photodiode, 4-pin coaxial package, and optional SC/APC,SC/PC, FC/APC,FC/PC optical fiber connector. Customers can select the length of optical fiber and pin definition based on actual demand. The output power is available from 1MW.

The 1310nm 10dBm SOA Semiconductor Optical Amplifier SM Butterfly is designed by using a high quality angled SOA chip and a TEC which can assure a stable amplified output for a large dynamic input signal. The devices are available in a standard, 14-pin butterfly package at the 1310nm and 1550nm bands. The SOA devices have high optical gain, high saturation output power, low polarization dependent loss, low noise figure and broad wavelength range. We have options of optical isolators for input and/or output side as well as output fibers of SM fibers, PM fibers and other special fibers per customer specifications. The products are Telcordia GR-468 qualified, and in compliance with RoHS requirement.