1550nm 2W Single Wavelength High Power CW DFB Fiber Laser Module Manufacturers

Randomly distributed feedback fiber laser based on Raman gain, its output spectrum has been confirmed to be wide and stable under different environmental conditions, and the lasing spectrum position and bandwidth of the half-open cavity DFB-RFL is the same as the added point feedback device The spectra are highly correlated. If the spectral characteristics of the point mirror (such as FBG) change with the external environment, the lasing spectrum of the fiber random laser will also change. Based on this principle, fiber random lasers can be used to realize ultra-long-distance point-sensing functions.

Fiber polarization controllers create stress birefringence by wrapping the fiber around two or three circular disks, thereby forming independent waveplates that change the polarization state of light propagating in a single-mode fiber.

Fiber Bragg gratings are optical components with a periodic structure that separate light into beams that propagate in predictable directions based on wavelength. Gratings serve as the core dispersive element of many modern spectroscopic instruments. They provide the critical function of selecting the wavelength of light required to perform the analysis at hand. Selecting the best grating for an application is not difficult, but it usually requires a degree of decision making when prioritizing the key parameters of the application.

A device that converts the CO concentration variable in the air into a corresponding output signal.

The gain medium of an optical amplifier can only achieve a limited gain. One approach achieves higher gain by geometrically setting up light so that it passes through multiple channels as it passes through the amplifier, known as a multipass amplifier. The simplest is a two-pass amplifier, where the beam passes through the crystal twice, usually with exactly or nearly opposite directions of propagation.